Good Stability and Low Insertion Loss Fiber Optic Mechanical Splice
The terminal of the cable can be used in two technologies: welding and cold bonding. The fiber cold connector is used when two pigtails are docked. The main component inside is a precision v-groove. After the two pigtails are used, the cold joints are used to realize the docking of the two pigtails. He is simpler and faster to operate, saving time than welding with a fusion splicer.
Features
● Non-pre-embedded fiber structure
● The reliability of fiber clamping is very good
● Good stability and low insertion loss
● Optical fiber quick-connect connector online tensile force has no effect on connection loss
● The use cost is very low, the installation speed is very fast
SPMS-A
| Applicable for | φ0.25 mm &φ0.90 mm fiber |
| Size | 45*4.2*4.7mm |
| Optical fiber diameter | 125μm ( 652 & 657 ) |
| Tight buffer diameter | 250μm & 900μm |
| Applicable mode | single & multimode |
| Operation time | about 10s (without fiber cut) |
| Insert loss | ≤ 0. 25 dB(1310nm & 1550nm ) |
| Return loss | ≤ -45dB |
| Fastening strength of naked fiber | >5 N |
| Clamping force of fiber with tight buffer | >8 N |
| Using temperature | -40 - +75 C |
| Reusability (10 times) | IL ≤ 0.2dB RL ≤ 5dB |
SPMS-B
| Applicable for | 3.1 x 2.0 mm drop cable |
| Size | 90*7*8mm |
| Optical fiber diameter | 125μm ( 657A & 657B ) |
| Tight buffer diameter | 250μm & 900μm |
| Applicable mode | single & multimode |
| Operation time | about 30s (without fiber cut) |
| Insert loss | ≤ 0.25dB(1310nm & 1550nm) |
| Return loss | ≤ -45dB |
| Success rate | >98% |
| Reusability times | >10times |
| Fastening strength of naked fiber | >5 N |
| Clamping force of fiber with tight buffer | >8 N |
| Tensile strength | >50 N |
| Using temperature | -40 - +75 C |
| On-line tensile strength) | IL ≤ 0.2dB |
| Mechanical durability (500 times) | IL ≤ 0.2dB |
| Drop off test ( 4 meters high, cement floor, three directions) | IL ≤ 0.2dB |
Applications
● Optical line distributing frame
● Fiber-optical network system
● Hi-speed fiber-optical transmission system
Ordering Information
| Part Number | Product Description |
| SPMS-A | Fiber Optic Mechanical Splice applied to connect φ0.25--φ0.9 fiber/cable |
| SPMS-B | Fiber Optic Mechanical Splice applicable for connecting 2.0X3.0mm drop cable |
Product Tags:
|
|
Fiber Optic Mechanical Splice With Good Stability And Low Insertion Loss Images
|
